Pellet boiler
ORLIGNO 400
 |
|
Fuel – pellets
 |
Biomass as a fuel is proven to be extremely efficient and economical. Repeatedly carried out analysis and comparison, showing that it is possible to heat our homes cheaply and ecologically. The issue has always remained: convenience and ease-of-use of organic sources of energy from biomass combustion. The solution is to use pellets as a fuel in low temperature solid fuel boilers. Pellets are no more than pressed biomass, prepared in granular form. The prepared fuel, although slightly more expensive, does not require any further processing whilst guaranteeing the high-energy parameters for the duration of storage. It is no wonder then that the pellet fuel, being relatively cheap and environmentally-friendly, has great potential for gaining more popularity. |
Reliable and cheap heating
To burn wood pellets in the best conditions we introduce ORLIGNO 400.
Orligno 400 jest jednym z najbardziej niezawodnych kotłów peletowych na rynku.
Its design was developed specifically for the combustion of organic pellets. In contrast to many other boilers with combustion of this fuel is not only an adaptation of a multi-fuel boiler, but a proven dedicated design. Both the body and the heat exchanger were designed from the ground up to meet the specific parameters of the pellet burner.
Using a precisely designed tubular heat exchanger, vertically embedded in a compact round body ensures high efficiency whilst maintaining the compact size.
Palnik Orligno 400 jest idealnie dopasowany do użytku przez cały rok. Kocioł Orligno 400 pracuje w podobny sposób jak kotły gazowe lub olejowe. Startuje i zatrzymuje się w zależności od zapotrzebowania na ciepło.
This saves space in the boiler room, also making the ORLIGNO 400 much easier to install.
Unique solutions used in the ORLIGNO 400 are a convenient and cost-effective way of powering both new and already existing installations.
Basic information
Basic fuel: wood pellets.
Efficiency up to 92%.
Energy class A-A.
Max. supply temp. 80oC.
Water capacity matched to the hydraulic flow.
Max. working pressure
Klasa 3 wg. EN 303-5.
Technical data
| Technical data | ||||||
| Power | Measured in | 16 kW | 30 kW | |||
| Flue | Ø mm | 133 | 149 | |||
| Fuel | pelet | pelet | ||||
| Power range | kW | 3,9 – 16 | 8 – 30 | |||
| Efficiency | % | 89,4 | 91,8 | |||
| Boiler class EN 303-5 | 3 | |||||
| Max. boiler temp. | °C | 80 | ||||
| Min return temp. | °C | 60 | ||||
| Max. working pressure | bar | 2,5 | ||||
| Chimney draft | Pa | 10 | ||||
| Tank capacity | l | 450 | ||||
| Combustion time | hrs | 90 | 70 | |||
| Fuel consumption – nominal power | kg/h | 3,5 | 6,7 | |||
| Fuel consumption – minimal power | kg/h | 0,9 | 1,75 | |||
| Exhaust gases – nominal power | °C | 145 | 170 | |||
| Exhaust gases – minimal power | °C | 80 | 84 | |||
